| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the
station exists but not whether it is actually a TDLS station. This
allows the operation to proceed for non-TDLS stations, causing
unintended side effects like modifying channel context and HT
protection before failing.
Add a check for sta->sta.tdls early in the ENABLE_LINK case, before
any side effects occur, to ensure the operation is only allowed for
actual TDLS peers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak
When processing Router Advertisements with user options the kernel
builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct
has three padding fields that are never zeroed and can leak kernel data
The fix is simple, just zeroes the padding fields. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()
Sashiko AI-review observed:
In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet
where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2
and passed to icmp6_send(), it uses IP6CB(skb2).
IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso
offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm
at offset 18.
If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao
would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called
and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO).
This would scan the inner, attacker-controlled IPv6 packet starting at that
offset, potentially returning a fake TLV without checking if the remaining
packet length can hold the full 18-byte struct ipv6_destopt_hao.
Could mip6_addr_swap() then perform a 16-byte swap that extends past the end
of the packet data into skb_shared_info?
Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and
ip6ip6_err() to prevent this?
This patch implements the first suggestion.
I am not sure if ip6ip6_err() needs to be changed.
A separate patch would be better anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak
When building netlink messages, tc_chain_fill_node() never initializes
the tcm_info field of struct tcmsg. Since the allocation is not zeroed,
kernel heap memory is leaked to userspace through this 4-byte field.
The fix simply zeroes tcm_info alongside the other fields that are
already initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption
When decrypting data that is not in-place (src != dst), there is
no need to save the high-order sequence bits in dst as it could
simply be re-copied from the source.
However, the data to be hashed need to be rearranged accordingly.
Thanks, |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix regsafe() for pointers to packet
In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N
regsafe() may return true which may lead to current state with
valid packet range not being explored. Fix the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: ensure names are nul-terminated
Reject names that lack a \0 character before feeding them
to functions that expect c-strings.
Fixes tag is the most recent commit that needs this change. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_helper: pass helper to expect cleanup
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
ctnetlink_alloc_expect() allocates expectations from a non-zeroing
slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not
present in the netlink message, saved_addr and saved_proto are
never initialized. Stale data from a previous slab occupant can
then be dumped to userspace by ctnetlink_exp_dump_expect(), which
checks these fields to decide whether to emit CTA_EXPECT_NAT.
The safe sibling nf_ct_expect_init(), used by the packet path,
explicitly zeroes these fields.
Zero saved_addr, saved_proto and dir in the else branch, guarded
by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when
NAT is enabled.
Confirmed by priming the expect slab with NAT-bearing expectations,
freeing them, creating a new expectation without CTA_EXPECT_NAT,
and observing that the ctnetlink dump emits a spurious
CTA_EXPECT_NAT containing stale data from the prior allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: ignore explicit helper on new expectations
Use the existing master conntrack helper, anything else is not really
supported and it just makes validation more complicated, so just ignore
what helper userspace suggests for this expectation.
This was uncovered when validating CTA_EXPECT_CLASS via different helper
provided by userspace than the existing master conntrack helper:
BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0
Read of size 4 at addr ffff8880043fe408 by task poc/102
Call Trace:
nf_ct_expect_related_report+0x2479/0x27c0
ctnetlink_create_expect+0x22b/0x3b0
ctnetlink_new_expect+0x4bd/0x5c0
nfnetlink_rcv_msg+0x67a/0x950
netlink_rcv_skb+0x120/0x350
Allowing to read kernel memory bytes off the expectation boundary.
CTA_EXPECT_HELP_NAME is still used to offer the helper name to userspace
via netlink dump. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject immediate NF_QUEUE verdict
nft_queue is always used from userspace nftables to deliver the NF_QUEUE
verdict. Immediately emitting an NF_QUEUE verdict is never used by the
userspace nft tools, so reject immediate NF_QUEUE verdicts.
The arp family does not provide queue support, but such an immediate
verdict is still reachable. Globally reject NF_QUEUE immediate verdicts
to address this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix potential double free of skb
When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at
line 48 and returns 1 (error).
This error propagates back through the call chain:
x25_queue_rx_frame returns 1
|
v
x25_state3_machine receives the return value 1 and takes the else
branch at line 278, setting queued=0 and returning 0
|
v
x25_process_rx_frame returns queued=0
|
v
x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb)
again
This would free the same skb twice. Looking at x25_backlog_rcv:
net/x25/x25_in.c:x25_backlog_rcv() {
...
queued = x25_process_rx_frame(sk, skb);
...
if (!queued)
kfree_skb(skb);
} |
| Libgcrypt before 1.12.2 sometimes allows a heap-based buffer overflow and denial of service via crafted ECDH ciphertext to gcry_pk_decrypt. |
| In MIT Kerberos 5 (aka krb5) before 1.22.3, there is a NULL pointer dereference if an application calls gss_accept_sec_context() on a system with a NegoEx mechanism registered in /etc/gss/mech. An unauthenticated remote attacker can trigger this, causing the process to terminate in parse_nego_message. |
| Vulnerability in the OpenSSH GSSAPI delta included in various Linux distributions. This vulnerability affects the GSSAPI patches added by various Linux distributions and does not affect the OpenSSH upstream project itself. The usage of sshpkt_disconnect() on an error, which does not terminate the process, allows an attacker to send an unexpected GSSAPI message type during the GSSAPI key exchange to the server, which will call the underlying function and continue the execution of the program without setting the related connection variables. As the variables are not initialized to NULL the code later accesses those uninitialized variables, accessing random memory, which could lead to undefined behavior. The recommended workaround is to use ssh_packet_disconnect() instead, which does terminate the process. The impact of the vulnerability depends heavily on the compiler flag hardening configuration. |
| A cross-site request forgery vulnerability was discovered in the login functionality (both standard and SAML) due to missing validation of the anti-CSRF token. An attacker with a valid account can trick a victim into unknowingly authenticating with the attacker's credentials. Any operation performed by the victim in this state is attributed to the attacker's account, compromising the integrity of the audit trail. |
| An access control vulnerability was discovered in the Smart Polling configuration functionality due to insufficient validation of user privileges. An authenticated user with limited privileges can remotely bypass the intended access control of the web management interface and modify the Smart Polling discovery configuration. This allows the attacker to disrupt the visibility of assets in the monitored network. |
| An improper certificate/host key validation vulnerability was discovered in the Smart Polling functionality, which established encrypted connections to target devices without validating the remote host's identity, and no option was provided to enable it. A man-in-the-middle attacker positioned between a sensor and a polled device can, during a polling session, impersonate the device and intercept the communication, including the credentials used to access it. The captured credentials can then be replayed to authenticate against the device itself or against other devices sharing the same credentials, allowing the attacker to access and tamper with the device's data and to disrupt its operations. |
| An access control vulnerability was discovered in the Credentials Manager functionality due to insufficient validation of user privileges. A remote authenticated user with limited privileges can view a limited subset of the available entries in the Credentials Manager. The actual credential values are not directly visible, but the user can delete entries or edit their properties. An attacker who deletes or edits an entry can disrupt authentication for dependent devices, and one who manipulates an entry's configuration may be able to indirectly obtain the credentials. |
| A template injection vulnerability was discovered in the Dashboards functionality due to improper validation of an input parameter. An authenticated user with the required privileges can define a dashboard containing a malicious payload, or a victim can be socially engineered into importing a malicious dashboard. When the victim views or imports the dashboard, the payload executes in their browser context, allowing the attacker to modify application data or disrupt application availability. |
