| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.5 until 8.0.6, the FTP parser in src/app-layer-ftp.c can continue allocating transactions after app-layer.protocols.ftp.max-tx is reached while processing one large chunk of FTP command data. The oversized transaction list is repeatedly processed with quadratic complexity after the too_many_transactions event, allowing crafted FTP traffic to degrade packet processing, reduce monitoring visibility, or cause denial of service. This issue is fixed in version 8.0.6. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.0.Final through 4.2.17.Final retains unbounded per-stream QPACK encoder state. QpackEncoder stores a queue and a dynamic-table index tracker for every encoded field section that references the QPACK dynamic table, keyed by the peer-controlled QUIC stream ID, and these entries are released only when the remote decoder sends a Section Acknowledgment or Stream Cancellation instruction — not when the HTTP/3 stream completes. There is no limit on the number of tracked streams, field sections, or retained bytes. A remote, unauthenticated HTTP/3 client can advertise a non-zero QPACK dynamic-table capacity, acknowledge the table insertion so the server reuses a dynamically indexed response header, and then omit all mandatory Section Acknowledgments while issuing sequential requests over a single QUIC connection, bypassing concurrent-stream limits and causing unbounded heap growth until the server exhausts memory (denial of service). Fixed in 4.2.18.Final. |
| vllm before 0.29.0 fails to enforce VLLM_MAX_AUDIO_CLIP_FILESIZE_MB limit in multimodal chat audio decoding, allowing unauthenticated clients to bypass file size restrictions. Attackers can submit oversized audio files through chat endpoints to consume excessive memory and CPU resources during decoding. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.4.6 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed an unauthenticated user to cause denial of service due to improper resource allocation limits in the GraphQL complexity calculation logic. |
| containerd is an open-source container runtime. Prior to versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1, a crafted OCI index graph can force very high CPU/memory usage during PullImage (before container start), causing long ContainerCreating stalls and, at larger sizes, node/runtime instability. Versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1 fix the issue. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. From 3.9.0 until 4.14.7, wazuh-clusterd in framework/wazuh/core/cluster/common.py allocates a payload buffer using the size declared in a 20-byte cluster protocol header before Fernet decryption validates the peer. An unauthenticated network peer can declare a payload of up to 256 MiB, stop sending after the header, and retain that allocation until the TCP connection closes. The cluster listener has no application-level per-source connection budget in affected versions, allowing concurrent sockets to multiply memory consumption and potentially terminate the cluster process, disrupt synchronization, and interrupt distributed API forwarding. This issue is fixed in version 4.14.7. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1, Atom exhaustion: OAuth2 JWT tag: scope values. extractscopes/1 parses scopes of the form .tag: and calls rabbitdatacoercion:toatom() to convert to a tag atom. The token signature is verified first, so the attacker cannot forge scopes , but in IdP configurations where scope content is user-influenced, each login with a novel tag value leaks one In deployments where users can influence the scopes included in their IdP-issued JWT rabbitmqauthbackendoauth2 enabled IdP permits attacker-influenced scope values in signed tokens. This issue is fixed in versions 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1. |
| cleanup_xml_node() in the SOAP XML parser recurses once per XML nesting level with no depth limit. An unauthenticated attacker can post a SOAP request containing tens of thousands of nested elements to any SoapServer endpoint, exhaust the stack and crash the process. The same unbounded recursion exists in the SOAP value decoder and in the WSDL node search helper. |
| mH-DEVELOPER smart home module is vulnerable to Denial of Service due to uncontrolled resource consumption. The Express bodyParser is configured with a 250 MB limit for JSON and URL-encoded request bodies. An authenticated attacker on the LAN can send large request bodies that exhausts buffers in RAM, causing out-of-memory conditions and crashing the fh-node process, resulting in denial of service. The successful attack depends on the current memory usage of the device which is not under full control of the attacker. Critically, due to CVE-2026-82930 all endpoints can be queried unauthenticated, so any user on LAN can perform this attack.
This issue was fixed in version 3.0.30 |
| Multiple vulnerabilities exist in the Analytics and Location Engine (ALE) that may allow for unauthorized access or denial of service. An unauthenticated remote attacker could exploit these vulnerabilities by sending specially crafted input or leveraging improper security configurations. Successful exploitation could result in a denial of service condition or unauthorized access to sensitive information. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.4.6 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed an unauthenticated user to cause denial of service due to improper resource allocation limits in the GraphQL complexity calculation logic. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's NE relocation fixup-chain parser was vulnerable because the NE relocation parser followed fixup chains without an active iteration limit or cycle detection. The vulnerability is triggered by opening a crafted NE executable whose in-bounds relocation entry points back to itself instead of reaching 0xffff. The parser repeatedly processed the same relocation and allocated another relocation object on each iteration. This can cause denial of service through continuous CPU and memory consumption. This issue is fixed in version 6.2.0. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Windows 64-bit crash-dump dmp64 parser was vulnerable because the Windows dmp64 parser used an input-controlled physical-memory-run PageCount directly as the bound of a per-page allocation loop. The vulnerability is triggered by opening a small crafted full-memory Windows crash dump. The parser repeatedly allocated and appended page descriptors without validating the count against the dump size. This can cause denial of service through excessive memory consumption and processing time. This issue is fixed in version 6.2.0. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit a vulnerability in the `/ipa/i18n_messages` endpoint by sending an arbitrarily large request body. This can cause the service to consume excessive memory, leading to memory exhaustion, degraded responsiveness, and a denial of service (DoS) condition. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit this vulnerability by sending oversized form POST requests to the `/ipa/migration/migration.py` endpoint. This can force the migration handler to read attacker-controlled request bodies fully into memory, leading to increased memory usage, slower request handling, and potential service disruption or denial of service. |
| libfyaml 0.9.6 contains a stack exhaustion vulnerability in fy_atom_iter_format(). When processing a specially crafted YAML document containing a very large literal or folded block scalar, the function repeatedly grows an internal buffer using alloca() inside a loop. The allocated stack memory is not released until the function returns, causing cumulative stack growth that can exceed the process stack limit and result in SIGSEGV and denial of service. |
| Nodemailer before 10.0.2 fails to properly flatten deeply nested arrays in recipient fields such as to, cc, and bcc, allowing attackers to cause stack exhaustion. Attackers can supply a deeply nested JSON recipient array that triggers recursive Array.toString() conversion, exhausting the call stack and terminating the Node.js process. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the stream protocol stored the FrameMax value negotiated during the Tune handshake but did not compare it with an inbound frame's declared length before buffering the frame. With the stream plugin enabled, a remote client could therefore cause excessive memory pressure and denial of service by declaring an oversized frame. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| hiredis commit 29ea279 (post-v1.5.0) contains an uncontrolled memory allocation vulnerability in its RESP aggregate parser. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: remove stale namespaces by NSID range during scan
nvme_scan_ns_list() drops the stale namespaces in each gap in the
reported NSID list one NSID at a time. Every iteration calls
nvme_find_get_ns() to look the namespace up and removes it if it is
present. The loop runs once per NSID in the gap rather than once per
namespace actually present.
NSIDs are 32-bit, so a target with a sparse NSID space can make a
single gap spin the loop billions of times with nothing to remove.
watchdog: BUG: soft lockup - CPU#4 stuck for 26s!
Workqueue: nvme-wq nvme_scan_work [nvme_core]
RIP: 0010:__srcu_read_unlock+0xb/0x20
Call Trace:
nvme_find_get_ns+0x7d/0xb0 [nvme_core]
nvme_scan_ns_list+0xe8/0x280 [nvme_core]
nvme_scan_work+0x18a/0x280 [nvme_core]
process_one_work+0x197/0x380
worker_thread+0x2fe/0x410
kthread+0xe0/0x100
Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range()
and give it an open (start, end) NSID range. ctrl->namespaces is
sorted by NSID, so the whole gap is dropped in a single walk that
stops once end is reached. This bounds the work by the namespaces
that are present instead of by the size of the gap. |
