| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: ring the doorbell if a burst ends in a drop
fbnic_tx_map() skips the doorbell write, and the completion request,
for every packet handed to it with xmit_more set, counting on the
packet which ends the burst to publish them all. When that packet is
dropped instead - skb_put_padto(), skb_cow_head() or a DMA mapping
failure - nothing rings. The descriptors of the preceding packets stay
invisible to the HW until the next transmit on that queue, which for a
burst-then-idle workload may never come.
Remember the meta descriptor of the last packet left without a doorbell
and flush it from the error paths. The completion request has to be set
on that descriptor rather than simply writing the tail, otherwise the HW
would transmit the packets but never report a head, and the ring would
fill up and stall for good.
This is very similar to Joe's recent series of fixes for bnxt.
Not seen in real life, reproduced under QEMU with failure injection. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid()
kvmhv_emulate_tlbie_all_lpid() iterates the nested-guest IDR and drops
mmu_lock before calling kvmhv_emulate_tlbie_lpid(), but does not hold a
reference on the kvm_nested_guest pointer obtained from the IDR. A
concurrent vCPU issuing a single-LPID tlbie (is=2, ric=2) can race
through kvmhv_flush_nested() -> kvmhv_remove_nested() -> idr_remove /
--refcnt -> kvmhv_release_nested() -> kfree(gp) in that window, leaving
the iterating vCPU with a dangling pointer. The subsequent
mutex_lock(&gp->tlb_lock) and accesses to gp->shadow_pgtable,
gp->shadow_lpid and gp->l1_host all touch freed memory. The free path
is fully L1-controlled.
Fix this by incrementing gp->refcnt inside the loop before dropping
mmu_lock, mirroring what kvmhv_get_nested() does, and releasing the
reference with kvmhv_put_nested() after the per-guest work completes.
This is the same get/put discipline already used at every other
call site that drops mmu_lock while holding a nested-guest pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat: unregister and release hooks on error
If nf_hook_entries_insert_raw() fails, the NAT hooks get never released,
resulting in a memleak.
Postpone setting nat_proto_net->nat_hook_ops when the hooks are
registered to simplify the error path to decide whether the nat hooks
need unwinding. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: wait for RCU readers before releasing dma_device
dma_issue_pending_all() walks the dma_device_list with
list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release()
unlinks the device with list_del_rcu() and then calls
device->device_release() (which in many drivers, such as plx_dma.c,
directly calls kfree()).
Because there is no grace period between unlinking the device and
freeing it, concurrent RCU readers in dma_issue_pending_all() can
access the device after it has been freed.
The lockless walk originally relied on clients holding a dmaengine
reference to pin the provider module, and therefore the device, for as
long as they might traverse the list. Commit 8ad342a86359 ("dmaengine:
Add reference counting to dma_device struct") decoupled the dma_device
lifetime from the module reference, so the device can now be released
while a reader is still walking the list.
Add synchronize_rcu() before the device is freed, so RCU readers are
guaranteed to have finished. Keep it unconditional: providers that do
not implement device_release() free the device themselves once
dma_async_device_unregister() returns. This call will delay for a grace
period with dma_list_mutex held, which is safe and only teardown path is
delayed. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()
When dma_device_put() drops the last reference on chan->device->ref,
dma_device_release() runs and may free the dma_device along with its
channels.
dma_chan_put() then still reads chan->device->owner via
dma_chan_to_owner() for the trailing module_put(). KASAN catches it:
slab-use-after-free in dma_chan_put+0x3e6/0x4c0
Read of size 8 by task insmod/6319
Freed by task 6319:
kfree+0x225/0x470
dma_chan_put+0x395/0x4c0
dmaengine_put+0xf8/0x160
Cache the module owner in dma_chan_put() before the put so the trailing
module_put() does not need chan->device. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short association responses
libipw_handle_assoc_resp() reads the capability, status and aid fields
of the 30-byte association response prefix and then computes the
information element length as
stats->len - sizeof(*frame)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() turns a
frame shorter than the fixed fields into a length near 64 KiB, and the
parser then reads past the receive buffer.
Both the ipw2100 and ipw2200 management receive paths reach this
function having established only that the frame carries the generic
24-byte three-address header.
Reject the frame before any fixed field is touched.
Found by an AI-assisted review of length arithmetic in management frame
parsers. Verified with a KUnit case under Generic KASAN on arm64 under
QEMU; I do not have the hardware, so it is not tested on a real device. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: free skb when disconnected
When the simulated link is disconnected, virt_wifi_start_xmit() returns
NET_XMIT_DROP without freeing the skb. dev_hard_start_xmit() treats this
return value as consumed, so every packet sent while disconnected leaks its
skb.
Free the skb before returning the drop status. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability that allows low-privileged authenticated users to delete department permission bindings via the DELETE /sys/sysDepartPermission/deleteBatch endpoint. Attackers can obtain row ids from the unguarded list endpoint and submit them in the ids parameter to remove menus and buttons departments can grant to their roles. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability in the SysDepartController appImportExcel handler that allows any authenticated user to import departments. Low-privileged attackers can upload a crafted Excel workbook to POST /sys/sysDepart/appImportExcel to create arbitrary sys_depart records in the administrator-maintained department tree. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: fix refcount bug in iwpm_get_nlmsg_request()
iwpm_get_nlmsg_request() initializes refcount _after_ list_add_tail()
making it accessible to global list where another CPU can kref_get()
on nlmsg_request causing a refcount "addition on 0" bug. Fix this
by initializing kref _before_ list_add_tail() so refcount for
nlmsg_request can be incremented/decremented normally. In addition,
also initialize every field before list_add_tail(). |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: use the adjusted address for the highmem page lookup
swiotlb_bounce() reads the page frame number from the slot's recorded
orig_addr, then advances orig_addr by tlb_offset to reach the address
the caller asked about. The highmem branch mixes the two: the offset
within the page comes from the adjusted address, the page from the value
before it.
Once the adjustment crosses a page boundary the pair no longer describes
one location, and the whole copy lands one page below the intended one
for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE
writes the device data over the wrong page and leaves the intended one
stale, DMA_TO_DEVICE feeds the device from a page the mapping may not
cover. Partial syncs through dma_sync_single_range_for_*() are what make
tlb_offset non-zero.
The branch test is picked the same way, so a slot recorded in lowmem can
be adjusted into highmem and the lowmem path then hands a highmem
address to phys_to_virt().
Take both from orig_addr once it is final and keep pfn in the branch
that uses it. PhysHighMem() asks the question straight from the address,
as dma-debug already does. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability in the OssFileController queryById handler that allows low-privileged authenticated users to read object storage file records. Attackers who know a record id can request GET /sys/oss/file/queryById to obtain original file names and direct storage URLs of files uploaded by other users. |
| JeecgBoot through 3.9.5 contains an insecure direct object reference vulnerability that allows authenticated users to delete other users' AI voice records by supplying an arbitrary userId to DELETE /airag/voice/deleteVoiceRecord. Attackers can obtain record ids from the unchecked GET /airag/voice/listByUser endpoint and delete victims' text-to-speech history entries stored in Redis, one per request. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability in the getRolesByUserId handler of SystemApiController that allows authenticated users to retrieve any user's role codes. Low-privileged attackers can supply arbitrary userId values to GET /sys/api/getRolesByUserId to enumerate role assignments and identify administrator accounts. |
| CoreShop through 1.5.5 contains an authorization bypass vulnerability in the OrderController that allows authenticated customers to act on other customers' orders by supplying user-controlled ids. Attackers can omit the data field in OrderConfirm or supply another reshipId to SendReship to confirm receipt of others' orders and overwrite return tracking details. |
| MultiVendorX WordPress plugin through 5.0.19 contains an incorrect authorization vulnerability that allows vendor accounts to modify marketplace-wide settings via the settings REST endpoint. Attackers with the store_owner role can send POST requests to /wp-json/multivendorx/v1/settings, gated only by edit_stores, to overwrite commission, payout, and onboarding settings. |
| ConvertX through 0.19.0 contains an arbitrary file read vulnerability that allows authenticated users to read server files because src/converters/pandoc.ts invokes Pandoc without the --sandbox flag. Attackers can upload a reStructuredText document with an include directive naming an absolute path, convert it, and download output containing the referenced file's contents. |
| ImageMagick on Windows through 7.1.2-33 and 6.9.13-58 contains an uncontrolled search path vulnerability in NTGhostscriptEXE() that launches gswin64c.exe by bare name when Ghostscript is unregistered. Attackers can plant a malicious gswin64c.exe in the working directory to execute code with ImageMagick privileges when PDF, PostScript, or EPS files are converted. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability in the queryPageList handler of OpenApiController that allows any authenticated user to list OpenAPI registry definitions. Low-privileged attackers can query GET /openapi/list to read virtual paths, internal origin URLs, IP whitelists, and header and parameter templates intended for administrators. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability in the SysPositionController deleteBatch handler that allows any authenticated user to delete organizational positions. Low-privileged attackers can send comma-separated position ids, obtained from the unguarded list endpoint, to remove all sys_position rows and orphan user-position assignments. |
