| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip unsettled links in link iterator
bpf_link_prime() inserts a link into link_idr before anon_inode_getfile()
succeeds and before bpf_link_settle() publishes the ID in link->id.
bpf_link_by_id() treats such an ID-zero link as unsettled, but the link
iterator takes a reference without this check.
If anon_inode_getfile() then fails, the creator removes the ID and frees
its still-private link directly. The iterator is left with a dangling
reference and its next bpf_link_put() accesses freed memory.
Treat ID-zero entries as transient in bpf_link_get_curr_or_next(), just as
bpf_link_by_id() does.
BUG: KASAN: slab-use-after-free in bpf_link_put
Write of size 8 by task exp/384
Call Trace:
bpf_link_put kernel/bpf/syscall.c:3372
bpf_link_seq_next kernel/bpf/link_iter.c:33
bpf_seq_read kernel/bpf/bpf_iter.c:158
vfs_read fs/read_write.c:572
ksys_read fs/read_write.c:716
do_syscall_64 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:121
Kernel panic - not syncing: KASAN: panic_on_warn set ... |
| In the Linux kernel, the following vulnerability has been resolved:
veth: manage XDP program pointers during channel resize
veth_set_channels() tears down XDP resources for removed RX queues
without clearing rq->xdp_prog. If the program is then detached or
replaced, those queues keep the old pointer after bpf_prog_put().
A later channel increase can re-enable NAPI and run the freed program.
BUG: unable to handle page fault for address: ffffc90000256048
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: veth_xdp_rcv_skb (include/linux/filter.h:779
include/net/xdp.h:696 drivers/net/veth.c:820)
Call Trace:
veth_xdp_rcv (drivers/net/veth.c:941)
veth_poll (drivers/net/veth.c:986)
__napi_poll (net/core/dev.c:7787)
net_rx_action (net/core/dev.c:7850 net/core/dev.c:8007)
handle_softirqs (kernel/softirq.c:645)
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL
An LWT_SEG6LOCAL program can invalidate its cached SRH with
bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter
may reallocate skb->head, leaving the per-CPU SRH pointer dangling.
Post-program SRH validation then writes through that pointer.
Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier
rejects this unsafe helper combination. Other LWT program types continue
to expose the helper through lwt_out_func_proto(). |
| OpenPrinting CUPS before 2.4.20 contains a double-free in printer-class management. When CUPS-Add-Modify-Class replaces an existing class member list, add_class() frees pclass->printers without clearing the pointer. If subsequent validation fails, the class retains the dangling pointer; CUPS-Delete-Class subsequently frees the same allocation in cupsdDeletePrinter(). A client authorized to modify and delete classes can cause scheduler-wide denial of service. The default policy requires @SYSTEM privileges. |
| A double free and use-after-free vulnerability in the RdbLoadDeletedNodes function of the RDB graph decoders (src/serializers/decoders/*/decode_graph_entities.c) in FalkorDB before 4.18.1 allows a remote attacker who can issue Redis replication commands (for example, against an instance with no password configured) to cause a denial of service or execute arbitrary code in the redis-server process by supplying a crafted RDB stream whose deleted-nodes buffer length is not a multiple of sizeof(NodeID). The length check relies on ASSERT(), which is compiled out in release builds, so the function continues after freeing the buffer, reading it and freeing it a second time. |
| Double Free in VLC versions <= 3.0.6 leads to a crash. |
| All versions of Node.js 9.x and 10.x are vulnerable and the severity is HIGH. An attacker can cause a denial of service (DoS) by causing a node process which provides an http server supporting TLS server to crash. This can be accomplished by sending duplicate/unexpected messages during the handshake. This vulnerability has been addressed by updating the TLS implementation. |
| Node.js: All versions prior to Node.js 6.15.0: Debugger port 5858 listens on any interface by default: When the debugger is enabled with `node --debug` or `node debug`, it listens to port 5858 on all interfaces by default. This may allow remote computers to attach to the debug port and evaluate arbitrary JavaScript. The default interface is now localhost. It has always been possible to start the debugger on a specific interface, such as `node --debug=localhost`. The debugger was removed in Node.js 8 and replaced with the inspector, so no versions from 8 and later are vulnerable. |
| roccat_report_event in drivers/hid/hid-roccat.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free in certain situations where a report is received while copying a report->value is in progress. |
| Use After Free in GitHub repository vim/vim prior to 9.0.0046. |
| A maliciously crafted JT file in Autodesk AutoCAD 2022, 2021, 2020, 2019 can be used to trigger use-after-free vulnerability. Exploitation of this vulnerability may lead to code execution. |
| vim is vulnerable to Use After Free |
| curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory. |
| In the Linux kernel before 5.4.16, a race condition in tty->disc_data handling in the slip and slcan line discipline could lead to a use-after-free, aka CID-0ace17d56824. This affects drivers/net/slip/slip.c and drivers/net/can/slcan.c. |
| In the Linux kernel before 5.2.10, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/usb/class/cdc-acm.c driver, aka CID-c52873e5a1ef. |
| Python 2.7.14 is vulnerable to a Heap-Buffer-Overflow as well as a Heap-Use-After-Free. Python versions prior to 2.7.14 may also be vulnerable and it appears that Python 2.7.17 and prior may also be vulnerable however this has not been confirmed. The vulnerability lies when multiply threads are handling large amounts of data. In both cases there is essentially a race condition that occurs. For the Heap-Buffer-Overflow, Thread 2 is creating the size for a buffer, but Thread1 is already writing to the buffer without knowing how much to write. So when a large amount of data is being processed, it is very easy to cause memory corruption using a Heap-Buffer-Overflow. As for the Use-After-Free, Thread3->Malloc->Thread1->Free's->Thread2-Re-uses-Free'd Memory. The PSRT has stated that this is not a security vulnerability due to the fact that the attacker must be able to run code, however in some situations, such as function as a service, this vulnerability can potentially be used by an attacker to violate a trust boundary, as such the DWF feels this issue deserves a CVE. |
| ImageMagick before 6.9.13-55 and 7.x before 7.1.2-30 contains a use-after-free vulnerability in the RSVG decoder when built without cairo support, triggered when a limit is hit during decoding. Attackers can supply crafted SVG files that cause a limit to be reached, leading to access of freed memory and a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table()
ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports
too soon.
Only after unregister_net_sysctl_table() we can be sure no threads can possibly
use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. |
| IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 could allow a remote attacker to cause a denial of service and obtain sensitive information due to a use-after-free. |
| Double free vulnerability in the j2k_read_ppm_v3 function in OpenJPEG before r2997, as used in PDFium in Google Chrome, allows remote attackers to cause a denial of service (process crash) via a crafted PDF. |
