Export limit exceeded: 25322 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25322 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98189 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext() wilc_wlan_handle_isr_ext() takes the RX transfer size from the device-reported interrupt status register (a 15-bit field shifted left by 2, up to 131068 bytes) and reads that many bytes from the device into rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap check only handles the current offset; the size itself is never compared against the buffer, so a bogus SDIO device can make the driver OOB-write rx_buffer by up to ~32K with data it controls. The oversized transfer also leaves rx_buffer_offset past the end of the buffer, after which the unsigned wrap check stops working and the overflow can repeat. Drop any transfer whose size exceeds the RX buffer, acknowledging the data interrupt and re-arming the RX engine so the bogus frame is discarded and reception can continue. This also restores the rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check relies on. This is not expected to change driver behavior in most cases: without this check, an oversized transfer would most likely corrupt neighboring kernel memory instead of completing anyway, and the drop path performs the same interrupt acknowledgment and RX engine re-arming as the normal path, so subsequent transfers are received unaffected. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98175 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: cancel reconnect work in clean_demultiplex_info() clean_demultiplex_info() cancels server->echo delayed work but not server->reconnect, which can cause a use-after-free when the demultiplex thread exits while a reconnect work is still queued: cifs_demultiplex_thread() cifs_readv_from_socket() cifs_reconnect() __cifs_reconnect() cifs_queue_server_reconn() mod_delayed_work(cifsiod_wq, &server->reconnect, 0) clean_demultiplex_info() cancel_delayed_work_sync(&server->echo) // echo canceled // reconnect NOT canceled kfree_sensitive(server) // server freed ...later, on cifsiod_wq: smb2_reconnect_server() server->srv_count // UAF read of freed server Fix this by canceling server->reconnect delayed work in clean_demultiplex_info() before the server is freed, the same way cifs_put_tcp_session() already does. | ||||
| CVE-2026-98178 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Skip KFD mapping clear before initialization amdgpu_amdkfd_clear_kfd_mapping() assumes that a non-NULL kfd_dev has a fully populated node array. This is not true when KFD device initialization fails after probe. For example, kgd2kfd_device_init() sets num_nodes before checking PCIe atomics support. On Polaris systems without the required atomics, it returns before allocating nodes[0], but the kfd_dev remains attached to the amdgpu device. A later GPU reset then dereferences nodes[0]->id. Require the authoritative KFD initialization flag before walking the node array, matching the existing KFD reset and teardown paths. (cherry picked from commit 4ac1835823c47903fbb278bbf474773c46f59edc) | ||||
| CVE-2026-98364 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: hold net_device reference under RCU in bundle creation xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into a local pointer without taking a device reference, then pass it to xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via dst_dev_put() and frees the old net_device, causing a use-after-free when xfrm6_fill_dst() later dereferences the stale dev pointer. BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860 (net/ipv6/xfrm6_policy.c:86 netdev_hold()) Read of size 8 at addr ffff8880142fe588 by task exploit/153 Call Trace: xfrm6_fill_dst+0x82c/0x860 xfrm_resolve_and_create_bundle+0x21d4/0x2bd0 xfrm_lookup_with_ifid+0x485/0x1640 ip6_dst_lookup_flow+0x19b/0x1e0 udpv6_sendmsg+0x1443/0x2dd0 Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU read-side critical section active until xfrm_fill_dst() has taken the required device references. | ||||
| CVE-2026-98188 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate curve data length in the calibration curve converters p54_convert_rev0() and p54_convert_rev1() read calibration curve data from the device-supplied EEPROM entry using channel and points-per-channel counts taken verbatim from that same entry, so an entry that declares more data than it carries drives an out-of-bounds read past the EEPROM buffer (verified with a KASAN reproducer of the conversion loop). The sibling converters p54_convert_output_limits() and p54_convert_db() already validate their counts against the entry length; this path was missed. Reject the entry when the counts do not fit in the entry data. | ||||
| CVE-2026-98191 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: release runtime PM ref on regdomain config failure wlcore_regdomain_config() gets a runtime PM reference before sending the regulatory-domain command. When wlcore_cmd_regdomain_config_locked() fails, the function queues recovery and returns without dropping that reference. Release the reference after handling the command result so both success and failure paths balance the preceding pm_runtime_resume_and_get(). The recovery worker takes a separate runtime PM reference and cannot release the reference held here. | ||||
| CVE-2026-98194 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix UAF in lbtf_free_adapter() lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command buffers before calling timer_delete_sync() to wait for the command timer callback. If the timer callback (command_timer_fn) is already running when lbtf_free_cmd_buffer() frees the command array, the callback dereferences priv->cur_cmd->cmdbuf which points to freed memory. Swap the order so that timer_delete_sync() runs first, ensuring any in-flight callback has completed before the command buffers are freed. | ||||
| CVE-2026-98198 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pwm-fan) Stop RPM timer before freeing tach data sample_timer() rearms the RPM timer and accesses the devm-managed ctx->tachs and ctx->pulses_per_revolution arrays. The cleanup action which stops the timer is registered before those arrays are allocated. Since devres releases entries in reverse order, driver detach can free the arrays before pwm_fan_cleanup() shuts down the timer. A timer expiry in that window accesses the freed tach data. With a KASAN kernel, a test-only kprobe delayed entry to pwm_fan_cleanup() while normal sysfs unbind ran. Each of three runs reported three four-byte reads and two four-byte writes in sample_timer() after its backing devm allocations had been freed. The helper did not invoke the timer callback, cleanup actions or free functions. With the fix, three matching unbind runs completed without KASAN, BUG, WARNING, Oops or panic. Instrumentation confirmed that timer retirement completed before the first timer backing allocation was released. Split timer retirement from the power cleanup and register its devres action after the timer backing data and IRQ actions are installed. This preserves the early power rollback action while ensuring the timer is retired before its backing data is released. Use timer_shutdown_sync() because the callback can rearm itself. | ||||
| CVE-2026-98200 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show() nsensor->current_state is dynamically replaced as the sensor's state changes. update_numeric_sensor_from_wobj() does this by freeing the old string and installing a new one: if (strcmp(trimmed, nsensor->current_state)) { new_string = hp_wmi_strdup(dev, trimmed); if (new_string) { devm_kfree(dev, nsensor->current_state); nsensor->current_state = new_string; } } This function is only ever called from hp_wmi_update_info() while state->lock is held, so the free-and-replace itself is properly serialized against concurrent updates. fungible_show(), however, reads the same pointer after the lock has already been dropped: err = hp_wmi_update_info(state, info); if (err) return err; switch (prop) { ... case HP_WMI_PROPERTY_CURRENT_STATE: seq_printf(seqf, "%s\n", nsensor->current_state); break; hp_wmi_update_info() takes state->lock internally and releases it before returning, so by the time fungible_show() dereferences nsensor->current_state in seq_printf(), no lock is held. Two processes reading a sensor's current_state debugfs entry at overlapping times (or one reading it while another read of the same sensor triggers a refresh) can race: one thread's seq_printf() can be part-way through printing the string at the moment another thread's call into update_numeric_sensor_from_wobj() frees it with devm_kfree() and installs a new pointer, causing a use-after-free read. Take state->lock around the read in fungible_show() as well, so it can never run concurrently with the free-and-replace in update_numeric_sensor_from_wobj(). | ||||
| CVE-2026-98365 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access mr_check_range() validates that [iova, iova+length) falls within the registered MR range using wraparound-prone arithmetic: if (iova < mr->ibmr.iova || iova + length > mr->ibmr.iova + mr->ibmr.length) A remote peer can craft an RDMA-Write/Read RETH so that iova + length wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the check. rxe_mr_iova_to_index() then computes a huge index (int idx, only guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences mr->page_info[huge], causing an out-of-bounds read/write and a kernel oops that is triggerable by an unauthenticated remote peer. Rewrite the check in overflow-safe form; the first two clauses guarantee that the subsequent subtractions do not underflow: if (iova < mr->ibmr.iova || length > mr->ibmr.length || iova - mr->ibmr.iova > mr->ibmr.length - length) With the fix, mr_check_range() returns -EINVAL for the crafted iova and the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB. | ||||
| CVE-2026-98367 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept We need to clear cep before release state_lock as siw_qp_llp_close and siw_qp_modify->siw_qp_llp_close did. Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock is released before the error path cleanup. A concurrent ibv_modify_qp() transitioning the QP to ERROR can race in this window: siw_accept() ibv_modify_qp(ERROR) ---------------------- ---------------------- siw_qp_modify() fails up_write(&qp->state_lock) down_write(&qp->state_lock) nextstate_from_idle(): if (qp->cep) siw_cep_put(qp->cep) <- frees cep qp->cep = NULL goto error cep->qp = NULL <- UAF Clear qp->cep and drop the association reference taken by siw_cep_get(), all under the write lock held from the initial down_write(&qp->state_lock). Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free the cep before siw_accept() is done with it. | ||||
| CVE-2026-98179 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix rmmio iounmap skipped on device removal amdgpu_pci_remove() calls drm_dev_unplug() before fini_sw(), so drm_dev_enter() is already false there and the iounmap() guarded by it is skipped. This .remove path runs on both hot-unplug and plain rmmod, so the register BAR ioremap mapping leaks one instance per unload. Unmap rmmio unconditionally (guard only on non-NULL) and drop the now unused idx. (cherry picked from commit dd6f86a97260e5207d3329ad03aa89fdad61b1e6) | ||||
| CVE-2026-98180 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: RCU-free the scheduler-containing ring and VM objects Both struct msm_ringbuffer and struct msm_gem_vm embed a struct drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then free the containing object with plain kfree(). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace (the submit out-fence, or a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded scheduler after the ring/VM is freed, so a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing objects with kfree_rcu() instead of kfree(). Patchwork: https://patchwork.freedesktop.org/patch/750234/ | ||||
| CVE-2022-26878 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| drivers/bluetooth/virtio_bt.c in the Linux kernel before 5.16.3 has a memory leak (socket buffers have memory allocated but not freed). | ||||
| CVE-2021-43975 | 5 Debian, Fedoraproject, Linux and 2 more | 21 Debian Linux, Fedora, Linux Kernel and 18 more | 2026-10-08 | 6.7 Medium |
| In the Linux kernel through 5.15.2, hw_atl_utils_fw_rpc_wait in drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c allows an attacker (who can introduce a crafted device) to trigger an out-of-bounds write via a crafted length value. | ||||
| CVE-2020-36558 | 2 Linux, Redhat | 5 Linux Kernel, Enterprise Linux, Rhel Eus and 2 more | 2026-10-08 | 5.1 Medium |
| A race condition in the Linux kernel before 5.5.7 involving VT_RESIZEX could lead to a NULL pointer dereference and general protection fault. | ||||
| CVE-2022-41850 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-08 | 4.7 Medium |
| roccat_report_event in drivers/hid/hid-roccat.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free in certain situations where a report is received while copying a report->value is in progress. | ||||
| CVE-2022-0264 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| A vulnerability was found in the Linux kernel's eBPF verifier when handling internal data structures. Internal memory locations could be returned to userspace. A local attacker with the permissions to insert eBPF code to the kernel can use this to leak internal kernel memory details defeating some of the exploit mitigations in place for the kernel. This flaws affects kernel versions < v5.16-rc6 | ||||
| CVE-2021-4135 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| A memory leak vulnerability was found in the Linux kernel's eBPF for the Simulated networking device driver in the way user uses BPF for the device such that function nsim_map_alloc_elem being called. A local user could use this flaw to get unauthorized access to some data. | ||||
| CVE-2021-4001 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 4.1 Medium |
| A race condition was found in the Linux kernel's ebpf verifier between bpf_map_update_elem and bpf_map_freeze due to a missing lock in kernel/bpf/syscall.c. In this flaw, a local user with a special privilege (cap_sys_admin or cap_bpf) can modify the frozen mapped address space. This flaw affects kernel versions prior to 5.16 rc2. | ||||