Export limit exceeded: 25272 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25272 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63990 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: refuse to enslave CAN devices syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c. | ||||
| CVE-2026-63991 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails. | ||||
| CVE-2026-63992 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine. | ||||
| CVE-2026-63994 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed. | ||||
| CVE-2026-63995 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: validate start_cmd_payload_size from module The CMIS firmware update code reads start_cmd_payload_size from the module's FW Management Features CDB reply and uses it directly as the byte count for memcpy. The destination buffer is 112 bytes (ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious module (or corrupted response) can cause a OOB write later on in cmis_fw_update_start_download(). Let's error out. If modules that expect longer LPL writes actually exist we should revisit. struct cmis_cdb_start_fw_download_pl's definition has to move, no change there. | ||||
| CVE-2020-35501 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-07 | 3.4 Low |
| A flaw was found in the Linux kernels implementation of audit rules, where a syscall can unexpectedly not be correctly not be logged by the audit subsystem | ||||
| CVE-2020-14304 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 4.4 Medium |
| A memory disclosure flaw was found in the Linux kernel's ethernet drivers, in the way it read data from the EEPROM of the device. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality. | ||||
| CVE-2025-3928 | 3 Commvault, Linux, Microsoft | 3 Commvault, Linux Kernel, Windows | 2026-10-07 | 8.8 High |
| Commvault Web Server has an unspecified vulnerability that can be exploited by a remote, authenticated attacker. According to the Commvault advisory: "Webservers can be compromised through bad actors creating and executing webshells." Fixed in version 11.36.46, 11.32.89, 11.28.141, and 11.20.217 for Windows and Linux platforms. This vulnerability was added to the CISA Known Exploited Vulnerabilities (KEV) Catalog on 2025-04-28. | ||||
| CVE-2026-58649 | 3 Apple, Linux, Microsoft | 9 Macos, Linux Kernel, .net and 6 more | 2026-10-07 | 6.5 Medium |
| Origin validation error in .NET allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-98361 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths Commit 0b261d7c1cd3 ("RDMA/rxe: Break endless pagefault loop for RO pages") dropped the access permission test from rxe_check_pagefault() and left only HMM_PFN_VALID. A page faulted in read-only, for example a page-cache folio behind a PROT_READ file mapping, then satisfies the check and ODP write operations (RDMA WRITE, RDMA READ response, SEND payload, atomics) modify it through kmap without ever breaking CoW. An unprivileged user can register an ODP MR over such a mapping and have incoming RDMA traffic overwrite the page cache of a file it only holds O_RDONLY, including /etc/passwd or setuid binaries. This is the same primitive class as Dirty COW and CVE-2022-2590. mlx5 has the missing invariant: its ODP path sets the device write bit only for pfns that carry HMM_PFN_WRITE. Restore it in rxe by requiring HMM_PFN_WRITE in rxe_check_pagefault() for every operation except RXE_PAGEFAULT_RDONLY. A write to a non-writable VMA now fails the one fault attempt with -EPERM from hmm_vma_fault() instead of re-faulting forever. For a writable VMA the fault breaks CoW and the write lands in the private page. Keep pmem flushes on the read-only check. arch_wb_cache_pmem() never modifies memory, and the FLUSH access bits do not make the umem writable, so classifying flushes as writes would make every flush against a flush-only MR fail. | ||||
| CVE-2026-98172 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbd_connection leak on cifs_get_tcp_session() error When an RDMA connection is successfully established via smbd_get_connection() but cifs_get_tcp_session() later fails (e.g. kthread_create() returns an error), the error path frees tcp_ses without first destroying the smbd_connection. Fix this by calling smbd_destroy() in the out_err cleanup path before kfree(tcp_ses). smbd_destroy() safely handles the case where smbd_conn is NULL, so it can be called unconditionally. | ||||
| CVE-2026-98358 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: IB/iser: reject a remote invalidation of an unregistered direction A write command whose data is sent entirely as immediate data is not registered. iser_reg_mem_fastreg() takes the DMA key path and leaves rdma_reg[ISER_DIR_OUT].desc at NULL, while iser_dma_map_task_data() has already set dir[ISER_DIR_OUT]. iser_check_remote_inv() looks at dir[] alone and hands the descriptor to iser_inv_desc(), which reads desc->sig_protected. A target that answers such a command with IB_WR_SEND_WITH_INV faults the initiator. Leaving those commands unregistered is deliberate. The same function already terminates the connection when a target sends a remote invalidation the initiator did not ask for. A target that invalidates a direction that was never registered is in the same class, so give it the same answer. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 0 UID: 0 PID: 40 Comm: kworker/u8:2 Not tainted 7.2.0-rc5-ISERHOST-gf5098b6bae76-dirty #3 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: rxe_wq do_work RIP: 0010:iser_task_rsp+0x6d6/0xec0 Code: 48 c1 ea 03 80 3c 02 00 0f 85 ba 06 00 00 48 8b 9b 78 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 20 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 76 06 00 00 80 7b 20 00 0f 84 3d 04 RSP: 0018:ffff88811b008db8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000001848 RDX: 0000000000000004 RSI: 1ffff11021587b12 RDI: 0000000000000020 RBP: ffff88810adc1ae4 R08: ffff888109b7f860 R09: ffffffff90a922c0 R10: ffff88810adc1a1c R11: 000000000000003c R12: ffff888109b7f800 R13: ffff88810adc1acc R14: ffff888109b7f820 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88818a676000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000005afe2b CR3: 000000010af23005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <IRQ> __ib_process_cq+0xe1/0x390 ib_poll_handler+0x6e/0x200 irq_poll_softirq+0x1df/0x480 ? clockevents_program_event+0x2ba/0x860 ? __pfx_irq_poll_softirq+0x10/0x10 handle_softirqs+0x18e/0x590 ? __pfx_handle_softirqs+0x10/0x10 ? __hrtimer_rearm_deferred+0x156/0x450 do_softirq+0x3b/0x60 </IRQ> <TASK> __local_bh_enable_ip+0x61/0x70 __alloc_skb+0x732/0x890 ? _raw_spin_lock_irqsave+0x85/0xe0 ? __pfx___alloc_skb+0x10/0x10 ? _raw_read_unlock_irqrestore+0x16/0x50 rxe_init_packet+0x16b/0x4f0 prepare_ack_packet+0xb8/0x830 rxe_receiver+0x499/0x9980 ? __pfx_rxe_receiver+0x10/0x10 ? rxe_completer+0x29e5/0x38c0 ? hrtimer_start_range_ns_common+0x75f/0x1730 ? hrtimer_start_range_ns+0xa6/0x2c0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_rxe_receiver+0x10/0x10 do_work+0x144/0x470 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-98360 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds rxe_get_mcg() publishes a newly allocated multicast group in rxe->mcg_tree before programming the backing Ethernet multicast address with rxe_mcast_add(), which runs outside mcg_lock. A local userspace RDMA client reaches this path with ATTACH_MCAST on a UD QP; if rxe_mcast_add() then returns an error (for example -ENODEV when the backing netdev has been removed, or a propagated dev_mc_add() error), the unwind frees the published group without removing it from the tree. A later lookup of the same MGID dereferences the freed struct rxe_mcg from __rxe_lookup_mcg(). Fix this by keeping the new mcg private until rxe_mcast_add() succeeds. Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add() before taking the tree reference, and free the still-private mcg on failure. Because the group is never visible in mcg_tree until the multicast address is programmed, no concurrent caller can look it up or attach a QP to a group that is about to be torn down, so the error path needs no conditional unwind. If another caller publishes the same MGID while the address is being programmed, the post-add re-check under mcg_lock finds the winner; this caller then drops its private object and balances its own rxe_mcast_add() with rxe_mcast_del() before returning the winner. Reproduced by forcing the rxe_mcast_add() error return under KASAN: without the change the next attach to the same MGID reports a slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure returns cleanly. A no-injection attach/detach regression, including a two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. | ||||
| CVE-2026-98353 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables Locked QP and CQ lookups from EQ interrupts can deadlock with create-path XArray updates. If an interrupt arrives while the create path holds the plain xa_lock, the lookup spins forever trying to acquire the same lock. Use IRQ-safe XArray helpers for all QP and CQ create-path updates, including the GSI QP store and error paths. Initialize both arrays with XA_FLAGS_LOCK_IRQ so sleeping allocations preserve interrupt state. | ||||
| CVE-2026-98354 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Fix receive buffer leak when PKey enforcement fails ib_mad_complete_recv() initializes mad_recv_wc->rmpp_list and then runs ib_mad_enforce_security() before linking recv_buf onto that list. On failure it calls ib_free_recv_mad(), which only walks rmpp_list and frees the ib_mad_private of every buffer found there. As the list is still empty at that point, nothing is freed at all. The caller cannot clean up either: ib_mad_recv_done() sets recv to NULL right after ib_mad_complete_recv() returns, assuming the MAD layer took ownership of the buffer. Every MAD that fails the PKey check therefore leaks one ib_mad_private (about 300 bytes per IB port MAD, ~2K for OPA), and a remote node can trigger this repeatedly by sending MADs with a wrong PKey. Link recv_buf onto rmpp_list right after the list is initialized, so the error path has something to free. | ||||
| CVE-2026-98254 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: swiotlb: use the adjusted address for the highmem page lookup swiotlb_bounce() reads the page frame number from the slot's recorded orig_addr, then advances orig_addr by tlb_offset to reach the address the caller asked about. The highmem branch mixes the two: the offset within the page comes from the adjusted address, the page from the value before it. Once the adjustment crosses a page boundary the pair no longer describes one location, and the whole copy lands one page below the intended one for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE writes the device data over the wrong page and leaves the intended one stale, DMA_TO_DEVICE feeds the device from a page the mapping may not cover. Partial syncs through dma_sync_single_range_for_*() are what make tlb_offset non-zero. The branch test is picked the same way, so a slot recorded in lowmem can be adjusted into highmem and the lowmem path then hands a highmem address to phys_to_virt(). Take both from orig_addr once it is final and keep pfn in the branch that uses it. PhysHighMem() asks the question straight from the address, as dma-debug already does. | ||||
| CVE-2026-98369 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: add missing rcu_read_lock(), skb_dst_force() and dev_hold() for xfrm_trans_reinject() syzbot reported a suspicious RCU usage warning in ip6_pkt_drop(): WARNING: suspicious RCU usage in ip6_pkt_drop include/net/addrconf.h:389 suspicious rcu_dereference_check() usage! Call Trace: __in6_dev_get_safely include/net/addrconf.h:389 [inline] ip6_pkt_drop+0x596/0x610 net/ipv6/route.c:4620 ip6_pkt_discard+0x1c/0x30 net/ipv6/route.c:4651 xfrm_trans_reinject+0x324/0x630 net/xfrm/xfrm_input.c:806 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486 When commit 4f4920669d21 ("xfrm: Reinject transport-mode packets through workqueue") converted xfrm_trans_reinject from a tasklet to a workqueue, the reinjection loop ceased running in softirq context. Workqueue workers run in process context where local_bh_disable() does not enter an RCU read-side critical section under CONFIG_PREEMPT_RCU. Because finish callbacks (such as ip6_rcv_finish) expect to run under an RCU read lock (performing route lookups, l3mdev lookups, and accessing RCU-protected data structures), invoking them in workqueue context without rcu_read_lock() triggers RCU lockdep warnings. Furthermore, packets queued to the workqueue via xfrm_trans_queue_net() may carry non-refcounted (noref) dst entries (e.g. from ip_route_input_noref). Additionally, on netdevice unregistration, dst_dev_put() replaces dst->dev with blackhole_netdev, so dst entries do not keep skb->dev alive while queued in the workqueue. Fix these issues by: 1. Calling skb_dst_force(skb) in xfrm_trans_queue_net() while still in the caller's RCU section to ensure dst is reference-counted before queuing. 2. Holding a reference on skb->dev via dev_hold()/dev_put() across workqueue deferral so skb->dev remains valid during finish() callback processing. 3. Acquiring rcu_read_lock() around the finish callback invocation loop in xfrm_trans_reinject(). | ||||
| CVE-2026-98260 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exec: Cleanup POSIX timers right after de_thread() A per-thread CPU timer holds a reference to the PID of the thread it is attached to and, while it is armed, its node is queued in that thread's posix_cputimers. The task is looked up by that PID. When a non-leader thread exec()s, de_thread() changes which task owns that PID. pid_task(timer->it.cpu.pid, PIDTYPE_PID) then returns NULL, but the node is still queued on tsk, which is alive. timer_lock_sighand() takes a failed lookup to mean that the node is already dequeued, so it has nothing to undo. begin_new_exec() calls posix_cpu_timers_exit(me) right after exec_task_namespaces() and that removes the leftover node, so the state normally stays invisible. But bprm->point_of_no_return is set before de_thread(), so if unshare_files(), set_mm_exe_file(), exec_mmap() or exec_task_namespaces() fails, the task dies before it gets there. exit_itimers() then frees the k_itimer while its node is still queued, and reaping tsk later erases that freed node from the rbtree. In short: the non-leader thread B the parent timer_create(CLOCK_THREAD_CPUTIME_ID) timer_settime() arm_timer() // the node is queued on B execve() de_thread(B) exchange_tids(B, leader) // B's PID now belongs to the leader release_task(leader) __exit_signal(leader) posix_cpu_timers_exit(leader) // cleans leader's queue, not B's __unhash_process(leader) // that PID has no task anymore exec_mmap() mmap_read_lock_killable(old_mm) kill(B, SIGKILL) // -EINTR get_signal() do_exit() exit_itimers() posix_timer_delete() posix_cpu_timer_del() posix_timer_unhash_and_free() // freed while still queued wait4() release_task(B) posix_cpu_timers_exit(B) cleanup_timerqueue() timerqueue_del() // use-after-free Move the POSIX timer cleanup right after de_thread() before any of the later failure conditions brings the task into do_exit(). [ tglx: Move the cleanup right after de_thread() ] | ||||
| CVE-2026-98276 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lock the socket in sock_gettstamp() sk->sk_flags must only be changed while holding the socket lock, because sock_set_flag() and sock_reset_flag() use non atomic operations (__set_bit() and __clear_bit()). sock_gettstamp() is one of the last places where a bit of sk->sk_flags is changed from a syscall without owning the socket lock, through sock_enable_timestamp(sk, SOCK_TIMESTAMP). sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp, sunrpc, wireguard) need a careful audit, this will be addressed in a separate patch. Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind() can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set, because both threads perform a read-modify-write on the same word. CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW) -------------------------------- ---------------------------- read sk_flags = F read sk_flags = F compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP) store F | BIT(SOCK_RCU_FREE) sk_add_node_rcu(sk, ...) store F | BIT(SOCK_TIMESTAMP) After the lost update, SOCK_RCU_FREE is clear while the socket is visible to lockless UDP receive lookups. sk_destruct() then frees the socket immediately instead of waiting for a RCU grace period, while the receive path still holds a reference-less pointer to it: BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410 Read of size 8 at addr ffff888008806610 by task exploit/207 CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1 ipv4_pktinfo_prepare+0x30/0x410 udp_queue_rcv_one_skb+0x51c/0x1180 udp_unicast_rcv_skb+0x109/0x350 ip_protocol_deliver_rcu+0x14b/0x310 ip_local_deliver_finish+0x29d/0x390 ip_local_deliver+0x24d/0x2a0 Only grab the socket lock when SOCK_TIMESTAMP has to be set, to keep the common case lockless. | ||||
| CVE-2026-98359 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Reject unregistering netdevs in ib_get_eth_speed ib_device_get_netdev() intentionally returns a referenced net_device even when it is unregistering, so matching and cleanup callers can still find the association. The reference keeps struct net_device allocated, but does not guarantee that the device remains operational. ib_get_eth_speed() uses the returned device operationally by invoking its ethtool callback. Although that call is made under RTNL, the function does not verify the registration state first. An asynchronous RDMA port query can therefore call into a netdev after NETDEV_UNREGISTER and ndo_uninit have completed. Check for NETREG_REGISTERED while holding RTNL and return -ENODEV for a device which is being unregistered. Keeping RTNL across the check and the ethtool operation prevents unregister from starting between them. Keep the speed fallback and warning under RTNL as well, so the warning can safely read netdev->name. Drop the netdev reference before releasing RTNL once all accesses to the device are complete. | ||||